I got bored, so decided to make a guide to a perfect computer generated WDMD characters,even though you think it's easy, it's actually not on the computer, so here we go! this is part one, where we will be drawing Dexter, normally, later we'll get into different costumed versions, and styles of the characters SO here we go!
1. start like you would drawing Dexter on a normal piece of paper. with a circle, using the circle button, and a square using, what else? the square button! then using the line button, put a line through the image, as shown in the picture below. these, will be your computer guidelines.
2.now, start putting detail to the image, using the line button ot sort of, sketch out dexter's outfit, using the circle button, to do the first part of Dexter's hand.
3. now onto the facial features, this is a hard part. first we start with the head, using the curve line tool, it's a little tricky, but you can get it,draw out the ear, the side of his face, and his mouth and nose. you may have to use mutiple lines on the ear to make it easier on yourself, or using the circle tool, carefully make an oval, and using the paint tool, painting out part of the side linking to the face, you can begin to get rid of some of your guidelines now.Oh and be sure to start the line that links his nose and mouth to his glasses, like in the pic.
4. now for the glasses, this is a tuff part too, but I have an easy trick, to start the basics off, make two circles, like below
5. now, switch your paint color two white,and do a line through the circles, like so, and carefully paint over the top part of the glasses, like below, also piant over and lines that should'nt be there, except guidelines:
6. now,finish the glasses with afew more black lines. like below, use two more smaller circles to make the lenses, and then do what you did in step five again. the results should look close to this:
7.now to the worst part.....the hair. this'll be fun!we'll start with the basics. for the top part of his hair, do a very slightly curved line like below:
8. now we do the side curvy line, just follow the picture, you'll do fine.
9. ugh....the curls...The terrifying hard to make on a computer curls! I hate this part it's so hard! you have to carefully place the curves of lines, using two or more lines for each curls I did my best, I hope you guys can too, besure to erase some more guidelines when your done:
10. now we add some more details, starting with his hand, carefully using the curve lines tool draw out the fingers, there's three showing in this picture.erase the circles one you've finished the hand.
11. now, the pupils,I have no idea how to explain this, so here's the pics on what I did:
12.
13.
14.
15. now, do the rest of the sketch for his out fit, like in the picture below:
16. now erase your guide lines and add black to where needed.
17. now we're ready to color, first add the basics, use whatever shades you want for the first colors,we're gonna get a little more detail outta this Dexter later:
18. now using the line tool, we took a darker version of the skintone and already made the drawing look more detailed. we shall continue this as we go on.
19. now we do the same with the lab coat, I use blue to shade the lab coat, though gray works just as well.also add some tone to the glove, to amke it more realistic, and your done!
now, you can keep adding details on your own with the coloring. or stop there your choice, have fun!!
1. start like you would drawing Dexter on a normal piece of paper. with a circle, using the circle button, and a square using, what else? the square button! then using the line button, put a line through the image, as shown in the picture below. these, will be your computer guidelines.
2.now, start putting detail to the image, using the line button ot sort of, sketch out dexter's outfit, using the circle button, to do the first part of Dexter's hand.
3. now onto the facial features, this is a hard part. first we start with the head, using the curve line tool, it's a little tricky, but you can get it,draw out the ear, the side of his face, and his mouth and nose. you may have to use mutiple lines on the ear to make it easier on yourself, or using the circle tool, carefully make an oval, and using the paint tool, painting out part of the side linking to the face, you can begin to get rid of some of your guidelines now.Oh and be sure to start the line that links his nose and mouth to his glasses, like in the pic.
4. now for the glasses, this is a tuff part too, but I have an easy trick, to start the basics off, make two circles, like below
5. now, switch your paint color two white,and do a line through the circles, like so, and carefully paint over the top part of the glasses, like below, also piant over and lines that should'nt be there, except guidelines:
6. now,finish the glasses with afew more black lines. like below, use two more smaller circles to make the lenses, and then do what you did in step five again. the results should look close to this:
7.now to the worst part.....the hair. this'll be fun!we'll start with the basics. for the top part of his hair, do a very slightly curved line like below:
8. now we do the side curvy line, just follow the picture, you'll do fine.
9. ugh....the curls...The terrifying hard to make on a computer curls! I hate this part it's so hard! you have to carefully place the curves of lines, using two or more lines for each curls I did my best, I hope you guys can too, besure to erase some more guidelines when your done:
10. now we add some more details, starting with his hand, carefully using the curve lines tool draw out the fingers, there's three showing in this picture.erase the circles one you've finished the hand.
11. now, the pupils,I have no idea how to explain this, so here's the pics on what I did:
12.
13.
14.
15. now, do the rest of the sketch for his out fit, like in the picture below:
16. now erase your guide lines and add black to where needed.
17. now we're ready to color, first add the basics, use whatever shades you want for the first colors,we're gonna get a little more detail outta this Dexter later:
18. now using the line tool, we took a darker version of the skintone and already made the drawing look more detailed. we shall continue this as we go on.
19. now we do the same with the lab coat, I use blue to shade the lab coat, though gray works just as well.also add some tone to the glove, to amke it more realistic, and your done!
now, you can keep adding details on your own with the coloring. or stop there your choice, have fun!!